Welding rectifier VD-306 OUSE b/a

The rectifier welding VD-306 OUSE are designed to supply electric arc welding DC manual arc welding, cutting and surfacing of metals, from the mains of alternating current. The rectifier is designed for operation in closed premises with natural ventilation.Climatic performance of the rectifier is U, placement category "3" according to GOST 15150-69, for operation in temperate climate with temperature ambient air from minus 40 C to plus 40 C and relative humidity not more than 80% ( at temperature 20). Do not use the straightener to work in an environment saturated with dust, in an explosive environment and also in the environment containing caustic fumes and gases that Deplete the metal and insulation. Technical specifications VD-306 OUSE: -Rated voltage three-phase AC 3x 380 V. -Nominal frequency of 50 Hz. -Nominal welding current, 315 And at least -Nominal operating voltage, 32 To not less than -Minimum welding current, 45 But not more than -The voltage at idle, 70 At not more than -The nominal mode of operation, MON, 60 % The bobbin 104 kg